Réparez vos affaires Communauté Boutique

iPhone4s 电池更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 20 tutoriels qui comprennent cette étape.

Étape précédente

Traduction de l’étape 6

Retourner au tutoriel
Anglais
Chinois
Étape 6
iPhone 4S Battery Replacement: étape 0, image 1 de 2 iPhone 4S Battery Replacement: étape 0, image 2 de 2

  • Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone.

  • Be careful not to pull the plastic pull tab too hard as it can be ripped off very easily.

  • Remove the battery.

  • If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the ribbon cable.

  • If your replacement battery came with an uncreased cable, carefully crease the cable into the proper shape before installing the battery into the phone.

  • While installing the replacement battery, temporarily connect the battery connector to the phone to ensure proper alignment. Once the battery is glued in place, disconnect the battery connector.

  • Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

通过拉着外漏在外头的透明塑料条，将电池从手机取出。

请注意，不要太用力拉扯透明塑料条，因为它很容易一不小心就被扯掉了。

卸下电池。

如果你更换的电池采用塑料套管，请在安装前将其从带状电缆中拉出来并将其取下。

如果你的更换电池配有未加电的电缆，请在将电池安装到手机中之前小心地将电缆折叠成适当的形状。

安装更换电池时，请将电池接口暂时连接到手机以确保正确对齐。将电池胶合到位后，断开电池接口。

在组装好手机之后执行一次重启。这可以很简单地避免诸多可能的问题。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.

OSZAR »