iPhone 4S Logic Board Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 14 tutoriels qui comprennent cette étape.

Traduction de l’étape 7

Anglais

Néerlandais

Étape 7

Remove the following screws securing the logic board to the case:
One 2.5 mm Phillips screw near the vibrator motor
One 2.4 mm Phillips screw
One 3.6 mm standoff along the side of the logic board nearest the battery opening.
Use a standoff driver bit and driver handle to remove the single 3.6 mm standoff screw.
In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.